1. David Vizard’s How to Build Max-Performance Chevy Small-Blocks on a Budget (Performance How-To)

  • How To Build Max Performance CHEVY Small Blocks On A Budget: CarTech Manual – Softcover

2. Opti-Lube XPD All Seasons Diesel Fuel Additive: Gallon (1 Gallon (Treats 512 Gallons))

  • MADE FOR OPTIMAL LUBRICATION: Your truck has been there for you every minute and every mile, which is why it’s important to keep it in pristine condition and the tools in the toolbox. At Opti-Lube, our goal is to keep your engine operating at its best. Our fuel additive helps to increase the lubricity properties of ultra-low-sulfur diesel (ULSD) so that you can play more and worry less.
  • IMPROVES FUEL ECONOMY: Trucks are known for eating up fuel. Fortunately, there’s a way to fix that with Opti-Lube XPD formula. This diesel fuel additive has been shown to enhance fuel mileage year round, giving you more bang for your buck. With greater fuel economy, you’ll find increased power for both summer and winter driving.
  • CLEANS INJECTORS: When your fuel injectors build up with residue, your engine usually doesn’t run as efficiently. Opti-Lube XPD formula cleans injectors while helping prevent future build-up. This helps to reduce deposits and emissions, making this lube compatible with all vehicle emissions systems. Additionally, it acts as rust and corrosion prevention to keep your vehicle in tip-top shape.
  • ENHANCES PERFORMANCE: Whether during rain, snow, or shine, Opti-Lube XPD formula delivers. It works to improve the performance of your truck all year round. This fuel additive also helps separate water from Diesel fuel as a demulsifier and more than doubles the storage life of standard diesel fuel. Contains enough Anti-Gel to keep fuel flowing down to -10F*.
  • ECONOMY: With a treatment rate up to 512 gallons it will cost you just pennies per treated gallon. This diesel fuel treatment isn’t just limited to trucks; use it for your farm and construction equipment too!

3. Valvoline Syncromesh Manual Transmission Fluid 1 QT

  • Enhanced performance in both low and high temperature operating conditions
  • Helps reduce oxidation to control viscosity breakdown
  • Excellent wear protection under high loads and extreme pressure
  • Outstanding anti-foam performance to minimize cavitation

4. Lucas LUC10009 Transmission Fix 24 oz., Brown (Packaging May Vary) , White

  • Lucas Transmission Fix Stops Slip, Hesitation, Rough Shifting In Worn Transmissions And Completely Eliminates Most Seal Leaks
  • Fit Type: Universal
  • Can be added to existing fluid without draining any out
  • Improves shifting

5. Hayden Automotive 403 Ultra-Cool Tube and Fin Transmission Cooler

  • Size is 3/4 inch x 7-1/2 inch x 12-1/2 inch
  • Mid-size and full-size cars, pick-ups
  • GVWR up to 18,000 pounds, towing up to 3,500 pounds
  • Ultrasonically soldered for durability
  • 100 percentage pressure tested

6. Red Line (50204) SAE 75W80 API GL-4 Manual Transmission and Transaxle Lubricant – Car Gear Oil – 1 Quart Bottle

  • LONGER SYNCHRO LIFE – High-performance gear protection, satisfies the gear oil viscosity requirements of 75W, 80W and motor oil viscosities of SAE 30, 10W30, 5W30
  • OFFERS QUICKER SHIFTS – MLT Gear Oil with balanced friction control for most manual transmission synchronizers. Other synthetic gear oils are often too slippery
  • SAFE FOR BRASS SYNCHROS – As it lacks the reactive sulfurs found in most GL-5 oils that cause damage. Recommended for GL-1, GL-3 & GL-4 applications
  • POPULAR MOTOR OIL FOR – BMW, Honda/Acura, Ford Focus, late-model Mini Cooper, Land Rover/Range Rover LT77S, Mitsubishi, Dodge & Jeep NV1500, NV3500, NV3550 & NV5600 truck transmissions
  • WHY RED LINE – Established in 1979, Red Line Products perform & protect better than any on the market. No compromises

7. Performance Hei Ignition Distributor Compatible with Chevy GM SBC BBC 9000RPM V8 65k Coil 283 305 307 327 350 400 Small Blocks and 396 427 454 Big Blocks

  • New HEI distributor for small block/big block Chevys. Standard size HEI.
  • Direct fit for GM application utilizing the 4-pin ignition module.
  • 65,000 high voltage coil spark through 9,000 RPM, upgraded for racing application—-Japanese NSK Bearing, Aviation Grade Aluminum #7071, Melonized Steel Gear.
  • Fit 283, 305, 307, 327, 350, and 400 small blocks, and 396, 427, and 454 big blocks.
  • Factory warranty 100,000 miles or 5 years. US based service team, money back is guaranteed.

8. A-Team Performance Polished Billet Aluminum Column Shifter Lever Turn Signal Hazard Boots Tilt Compatible with GM Column 1967 to 1994, Chevrolet, Buick, Oldsmobile, Pontiac, and Cadillac

  • Construction — Made from stainless steel with polished billet aluminum finish
  • Compatible With — GM Columns 1967–1994 including Chevy (Chevrolet), Buick, Oldsmobile, Pontiac, and Cadillac cars and trucks
  • Also Compatible With — Aftermarket columns Flaming River, Billet Specialties, Ididit, Pro Comp, Racing Power Company, Pro Header, and many more
  • Measurements — Column Shifter 9inches, Turn Signal 7inches, Tilt Lever 5 1/2inches, Flasher Knob 3/4inches
  • Package Inclusions — A-Team Performance Polished Billet Aluminum Column Shifter Lever Turn Signal Hazard Tilt Compatible with GM Columns 1967-1994

9. Valvoline Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid 1 QT

  • Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
  • High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

10. VOTEX – MADE IN USA – DP001 Stainless Steel Engine Oil Drain Plug with Neodymium Magnet (M14 x 1.5 X 18 MM)

  • PREMIUM QUALITY – Our Votex drain plugs are MADE IN USA. From the Stainless Steel bar stock material, CNC machine that cuts our plug right down to the hands that craft each individual one. We carefully and pridefully construct our plugs here in our home state of Wisconsin. This ensures that your plug will be manufactured with real quality stainless steel (Not Pot Metal) that will last for countless years to come. Included with the drain plug is an aluminum crush washer.
  • HIGH TEMPERATURE NEODYMIUM MAGNET – Our plug uses a rare earth high strength neodymium magnet, rated specifically to function in high temperature environments extracting unwanted ferrous particles from your vehicles engine. Neodymium magnets are one of the strongest magnets available on the planet, giving the strength to hold weights over 2.2lbs. This empowers our plug with enormous strength to effectively pull these unwanted metals out of your motor oil resulting in longer engine life.
  • PREMIUM STAINLESS STEEL – The drain plug market has a plethora of options which are constructed of aluminum. Aluminum is an inferior metal choice due to its strength and commonly shear/snap leaving you with a broken plug stuck in your oil pan. Our goal is to provide plugs of the highest quality standard, that starts with using a metal that will be strong enough to last years. Our steel is sourced from the states, promising not to be a weak recycled material often found in foreign metals.
  • PROMISED PERFORMANCE – Our drain plugs use choice quality materials. Our magnet will extract small metal particles that are too fine for oil filters to catch along with capturing large metal shavings that plug filters. If you’re not 100% satisfied with its quality or performance, return your drain plug for a full refund!
  • EASY TO INSTALL – Our plug will install in place of your current drain plug. It will arrive with an aluminum crush washer which is recommend to be replaced with every oil change. Simply wipe the magnet clean of debris during oil change. USE AMAZON FITMENT DROP DOWN, EMAIL OR ASK A QUESTION TO ENSURE THIS WILL WORK WITH YOUR VEHICLE. [ SEE PRODUCT DETAILS BELOW FOR MORE DETAILED INFORMATION ] – USES 17MM WRENCH. FOR REPLACEMENT WASHERS SEARCH PART # B07ZQP2M94

Table of Contents